BMS 2S 7.4v 5A Charging module in Lahore
1 x BMS 2S 7.4v 5A Charging module
1 x BMS 2S 7.4v 5A Charging module
DIY Mobile Power Supply, 5V output for charging Phone, MP3, MP4, PSP or powering Arduino, Pi etc
Note:?Please observe correct?polarity as printed on the bottom of the module:- IN , IN- or the module will be damaged
Specifications:
Input: 6V-40V
Output: 5V / 3A (MAX)
Efficiency: 92% (MAX)
Switching frequency: 150KHZ
Working temperature: -40 ? – 85 ?
Baby Size: L: 59mm x W: 21mm x H: 17mm
Load capacity: Maximum output 3A
Applications: mobile power, mobile phones, USB powered devices.
Output?Port: Double USB
Model: XL6009
Main Color: Blue
Input voltage: 3.5V ~ 32V
Output voltage: 5V ~ 35V
Output current: Rated current is 2.5A, maximum 3A (Additional heat-sink is required)
Load regulation: ±0.5%
Voltage regulation: ±0.5%
Work Temperature: -40°C ~ +125°C
Maximum power: 10W
Net Weight: 11g
Size: 4.1 x 2.1 x 1.3cm
1 x Step Up Voltage Converter XL6009
Sooner or later, Arduino enthusiasts always come across the dot matrix display. It is a two-dimensional patterned LED array that is used to represent characters, symbols, and images. Almost all modern outdoor LED displays use dot matrices.
And there is hardly any better option than the MAX7219 IC to control them. This is a simple and somewhat inexpensive way of controlling a single matrix. In addition they can be chained together to control two or more dot matrices for larger projects.
Overall they are a lot of fun and quite useful as well, so let’s get started
– Single module can drive an 8*8 dot matrix common cathode
– Module Operating voltage: 5V
– Module dimensions : length 3.2cm X 3.2cm wide X 1.3cm
– Holes with four screws, diameter 3mm
– Modules with input and output interfaces, support for cascading multiple modules
1 x MAX7219 Dot Led Matrix 8×8 SMD Module (Unassembled- Not Soldered)
Live Chat