FUJI Magnetic Contractor SC-N1 SCN1 220VAC continues current 50A (use condition) | In Pakistan
FUJI Magnetic Contractor SC-N1 SCN1 220VAC continues current 50A (use condition) | Microsolution Lahore
[happyforms id=”5763″ /]
₨2,800
CompareFUJI Magnetic Contractor SC-N1 SCN1 220VAC continues current 50A (use condition) | In Lahore
Magnetic Contactor is an electrical component that has a function as a liaison with a load with a large capacity. The working principle of a Magnetic Contactor is similar to the way a relay works. Magnetic Contactor is an electrical component that has a function as a liaison with a load with a large capacity. The working principle of a Magnetic Contactor is similar to the way a relay works.
Fuji Sc-n1
Coil voltage 220vAc
Contineusly current 50Amp
Related products
-
All MIcroSolution Pro, SENSORS
Voltage Sensor Module DC 0-25V | Microsolution
Voltage Sensor For Arduino DC Raspberry Pi Amplifier Digital Current DC0-25V With Code.
Voltage Sensor Module DC 0-25V
The Voltage Sensor Module DC 0-25V is making this is because I couldn’t find any really helpful information on how to fix the code for my voltage sensor. Arduino’s have built in voltage sensors. Unfortunately, they only support voltages of 0-5 V. This module allows you to measure voltages of 0-25 V by presenting a lower voltage to the arduino for measuring.
After you have this value you simply feed it through some math and you get your actual voltage. Don’t ask me how this math works. I don’t know. If you do know however, please share. I’m really just editing the example code from the seller so that it will display decimal values instead far less useful int values.
By liking Our Facebook Page Embeded Studio , you can get special discount. Data Sheet of Voltage Sensor Module DC 0-25V can be also downloaded from the link.
To start you need to wire it up. It’s extremely easy as it only needs 3 wires.
Plug + into 5 V, – ground and S into an analogue pin. I have removed all but the relevant pins in a pin-out of the arduino nano. If you’re using another model then you’ll have to figure them out on your own. Any analogue pin will do. As far as I am aware at least. Once you have done this you’re ready to move on to the software.
- GND – This is where you connect the low side of the voltage you are measuring. Caution! : This is the same electrical point as your Arduino ground.
- VCC: The is where you connect the high side of the voltage you are measuring
- S: This connects to your Arduino analog input.
- – (or minus): This connects to your Arduino ground.
- +: This is not connected. It does absolutely nothing… zilch… nada… jack diddly doo doo.
[happyforms id=”5763″ /]
SKU: n/a -
All MIcroSolution Pro, SENSORS
DHT11 DIGITAL TEMPERATURE AND HUMIDITY SENSOR in Pakistan
DHT11 – Humidity and Temperature Sensor in Microsolution Hallroad Lahore
Specifications:
- Item: DHT11
- Measurement Range: 20-90%RH 0-50 ℃
- Humidity Accuracy: ±5％RH
- Temperature Accuracy: ±2℃
- Resolution: 1 Package:
- 4 Pin Single Row
- Pinning:
- 1=Vcc
- 2=Data
- 3=Open
- 4=GN
SKU: 50 -
All MIcroSolution Pro, SENSORS
360 Degree Laser Scanner YD Lidar X4 in Pakistan
360 Degree Laser Scanner YD Lidar X4 | Microsolution Hallorad Lahore
-
Delivery Type: Free Shipping - Payment Option: Cash on Delivery
- Return Policy: 7 Days Return Warranty
- Delivery Time: 24-48 Hours
- Rapid return on investment
- Environmentally friendly
- CALL NOW For Origina 360 Degree Laser Scanner YD Lidar X4
SKU: n/a -
-
All MIcroSolution Pro, SENSORS
SOIL MOISTURE SENSOR SOIL HYGROMETER HUMIDITY DETECTION MODULE
SOIL MOISTURE SENSOR SOIL HYGROMETER HUMIDITY DETECTION MODULE Microsolution Hallroad Lahore
- ✅Delivery Type: Free Shipping
- ✅Payment Option: Cash on Delivery
- ✅Return Policy: 7 Days Return Warranty
- ✅Delivery Time: 24-48 Hours
- ✅Rapid return on investment
- ✅Environmentally friendly
- ✅CALL NOW For Original SOIL MOISTURE SENSOR SOIL HYGROMETER HUMIDITY DETECTION MODULE Microsolution Hallroad Lahore
SKU: n/a
