-
×
CAN BUS Shield Arduino Uno in Pakistan
1 × ₨3,500
Subtotal: ₨3,500
All MIcroSolution Pro
Arduino LilyPad Arduino 328 Main Board ATmega328P ATmega328 16M In Pakistan
Arduino LilyPad Arduino 328 Main Board ATmega328P ATmega328 16M | Microsolution Lahore
[happyforms id=”5763″ /]
₨650
CompareArduino LilyPad Arduino 328 Main Board ATmega328P ATmega328 16M | Lahore
Specifications and Features:
| Microcontroller | ATmega168 or ATmega328V |
| Operating Voltage | 2.7-5.5 V |
| Input Voltage | 2.7-5.5 V |
| Digital I/O Pins | 14 |
| PWM Channels | 6 |
| Analog Input Channels | 6 |
| DC Current per I/O Pin | 40 mA |
| Flash Memory | 16 KB (of which 2 KB used by bootloader) |
| SRAM | 1 KB |
| EEPROM | 512 bytes |
| Clock Speed | 8 MHz |
Related products
-
All MIcroSolution Pro, SENSORS
Voltage Sensor Module DC 0-25V | Microsolution
Voltage Sensor For Arduino DC Raspberry Pi Amplifier Digital Current DC0-25V With Code.
Voltage Sensor Module DC 0-25V
The Voltage Sensor Module DC 0-25V is making this is because I couldn’t find any really helpful information on how to fix the code for my voltage sensor. Arduino’s have built in voltage sensors. Unfortunately, they only support voltages of 0-5 V. This module allows you to measure voltages of 0-25 V by presenting a lower voltage to the arduino for measuring.
After you have this value you simply feed it through some math and you get your actual voltage. Don’t ask me how this math works. I don’t know. If you do know however, please share. I’m really just editing the example code from the seller so that it will display decimal values instead far less useful int values.
By liking Our Facebook Page Embeded Studio , you can get special discount. Data Sheet of Voltage Sensor Module DC 0-25V can be also downloaded from the link.
To start you need to wire it up. It’s extremely easy as it only needs 3 wires.
Plug + into 5 V, – ground and S into an analogue pin. I have removed all but the relevant pins in a pin-out of the arduino nano. If you’re using another model then you’ll have to figure them out on your own. Any analogue pin will do. As far as I am aware at least. Once you have done this you’re ready to move on to the software.
- GND – This is where you connect the low side of the voltage you are measuring. Caution! : This is the same electrical point as your Arduino ground.
- VCC: The is where you connect the high side of the voltage you are measuring
- S: This connects to your Arduino analog input.
- – (or minus): This connects to your Arduino ground.
- +: This is not connected. It does absolutely nothing… zilch… nada… jack diddly doo doo.
[happyforms id=”5763″ /]
SKU: n/a -
All MIcroSolution Pro, SENSORS
SGX (formerly E2V) MEMS gas sensor NO2 H2 O3 sensor MiCS-2714
SGX (original E2V) MEMS gas sensor NO2 H2 O3 sensor MiCS-2714
Brand SGX. Output model category Digital sensors Working principle Gas sensor Sensor category Energy consumption sensor Material Polymers 
[happyforms id=”5763″ /]
SKU: n/a -
All MIcroSolution Pro, ARDUINO Nano
Arduino leonardo R3 in Pakistan
- ✅ Delivery Type: Free Shipping
- ✅ Payment Option: Cash on Delivery
- ✅ Return Policy: 7 Days Return Warranty
- ✅ Delivery Time: 24-48 Hours
- ✅ Rapid return on investment
- ✅ Environmentally friendly
- ✅ CALL NOW For Original Arduino leonardo R3 price in Pakistan Microsolution Hallroad lahore
SKU: n/a
