The Arduino Nano in pakistan  with usb cable is small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x) or ATmega168 (Arduino Nano 2.x). It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one.

Feature Of Arduino Nano V3:

  • Microcontroller : Atmel ATmega168 or ATmega328.
  • Operating Voltage (logic level) : l5 V.
  • Input Voltage (recommended) : 7-12 V.
  • Input Voltage (limits) : 6-20 V.
  • Digital I/O Pins : 14 (of which 6 provide PWM output).
  • Analog Input Pins : 8.
  • DC Current per I/O Pin : 40 mA.
  • Flash Memory : 16 KB (ATmega168) or 32 KB (ATmega328) of which 2 KB used by boot loader.
  • SRAM : 1 KB (ATmega168) or 2 KB (ATmega328).
  • EEPROM : 512 bytes (ATmega168) or 1 KB (ATmega328).
  • Clock Speed : 16 MHz.
  • Dimensions : 0.73″ x 1.70″.
  • Length : 45 mm.
Best quality Arduino Nano V3 with usb cable . Here you get Nano V3 with usb cable in reasonable price in karachi, lahore, islamabad, rawalpindi, peshawar and all over pakistan. nano v3 and usb cable.

Package Include:

1x Arduino Nano With Usb Cable (Black/Blue Color May Very)

ARDUINO NANO V3.0 in Hallroad Lahore



Arduino Nano is a surface mount breadboard embedded version with integrated USB. It is a smallest, complete, and breadboard friendly. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper. Physically, it is missing power jack. The Nano is automatically sense and switch to the higher potential source of power, there is no need for the power select jumper.

Nano’s got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It’s got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other)



  1.  Automatic reset during program download
  2.  Power OK blue LED
  3.  Green (TX), red (RX) and orange (L) LED
  4. Auto sensing/switching power input
  5. Small mini-B USB for programming and serial monitor
  6. ICSP header for direct program download
  7.  Standard 0.1” spacing DIP (breadboard friendly)
  8. Manual reset switch


  1. Microcontroller : Atmel ATmega 328
  2. Operating Voltage(logic level) : 5V
  3. Input Voltage (recommended) : 7-12 V
  4. Input Voltage (limits)  : 6-20 V
  5. Digital I/O Pins  : 14 (of which 6 provide PWM output)
  6. Flash Memory  : 32 KB (of which 2KB used by bootloader)
  7. SRAM  : 2 KB
  8. EEPROM   :  1 KB
  9. Clock Speed  : 16 MHz
  10. Dimensions   : 0.70” x 1.70”


  1.  CH340G Datasheet
  2. IC Atmel ATmega 328 Datasheet


1 x Mini USB Nano V3.0 ATmega328 5V 16M Micro-controller board For Arduino


× Live Chat!