2 Channel Solid State Relay Module For Arduino

390

2 Channel Solid State Relay Module For Arduino

2 Channel Solid State Relay Module For Arduino Hallroad Lahore

Specifications:

  • Omron 5V solid state relay, output with resistance fuse 240V 2A.
  • Size: 55 x 33 x 25
  •  Net weight: 21.5g
  • Input power: 5V DC  (160MA)
  • Input Control signal voltage: (0-2.5V state low level relay ON) (3.3-5V state high level relay OFF)
  • Blue KF301 terminal is more convenient to connect the control line.

Input part: 

  • DC+: Connect the positive pole of the power supply (power supply according to the relay voltage)
  • DC-: Connect the negative pole of the power supply
  • CH1: 1 Relay module signal trigger end (low level trigger is valid)
  • CH2: 2 way relay module signal trigger end (low level trigger is valid) )

High and low meaning:

  • High-level triggering : There is a forward voltage between the signal trigger terminal (IN) and the negative pole of the power supply. Usually , a triggering method is used to connect the positive pole of the power supply to the trigger terminal. When the trigger terminal has a positive voltage or triggers. At the voltage, the relay pulls in.
  • Low-level triggering : The voltage between the signal trigger terminal and the negative pole of the power supply is OV, or the voltage at the trigger terminal is lower than the voltage of the positive pole of the power supply. When the voltage is low enough to trigger, the relay is pulled in, usually A triggering method in which the negative pole of the power supply is connected to the trigger terminal , so that the relay is attracted.

Confirm on WhatsApp before ordering

آڈر سے پہلے واٹس ایپ پر کنفرم کرلیں شکریہ۔

Description

2 Channel Solid State Relay Module For Arduino in Pakistan

 

Description

– – Connect 0V to this pin.
+ – Connect 5V to this pin.
S – Controls relay 1, active Low! Relay will turn on when this input goes below about 2.0V

Please note this board is not manufactured by Modtronix! We do not have control of the brand and quality of components used! For boards using durable, brand name components, also have a look at our range of Modtronix products. Following are some lists (created by search terms) of Modtronix products.

2-Channel Relay Module Specifications:
– This module can be used with Arduino Special Sensor Shield V4.0.
– You can do some simple design about it.
– This is 2-Channel 5V Relay Module for Arduino PIC ARM AVR DSP.
– It can be able to control various appliances, and other equipments with large current.
– Easy to be controlled by a lots of Microcontrollers( Such as Arduino , 8051, AVR, PIC, DSP, ARM, ARM,
MSP430, PLC,TTL logic).
– Just use 5v input signal to control.
– Equipped with high-current relay, AC250V 10A, AC150V 10A; DC30V 10A , DC28V 10A.
– Dimensions:39 mm x 51 mm