- You cannot add "ARDUINO UNO WIFI REV2 in Pakistan" to the cart because the product is out of stock.
SD Card Reading Writing Module for Arduino | Pakistan
SD Card Reading Writing Module for Arduino | Microsolution Lahore
[happyforms id=”5763″ /]
₨150
CompareSD Card Reading Writing Module for Arduino | Lahore
SD Card Reading Writing Module for Arduino with the onboard 3.3V regulator.
It is easily interfaced as a peripheral to your Arduino, and other embedded boards and microcontrollers. Through programming, you can read and write to the SD card over SPI interface.
Related products
-
All MIcroSolution Pro, SOLAR PANELS
AE Solar AE M6-60 Series 250W in Pakistan -Microsolution
AE Solar AE M6-60 Series 250W in Pakistan-Microsolution
Description
- High performance modules of mono-crystalline solar cells
- Connection box with 6 bypass diodes
- ,2 mm thick safety glass of high transparence
- 12 year product warranty
- 12 years guarantee at 90% rated performance
- 30 years guarantee at 80% rated performance
- Certified from: TÜV, IEC 61215, IEC 61730, CE, ISO
- 40 or 50 mm aluminum frame
- Up to + 3% positive power tolerance
- Cell efficiency up to 18.52%
[happyforms id=”5763″ /]
SKU: n/a -
All MIcroSolution Pro, SENSORS
Voltage Sensor Module DC 0-25V | Microsolution
Voltage Sensor For Arduino DC Raspberry Pi Amplifier Digital Current DC0-25V With Code.
Voltage Sensor Module DC 0-25V
The Voltage Sensor Module DC 0-25V is making this is because I couldn’t find any really helpful information on how to fix the code for my voltage sensor. Arduino’s have built in voltage sensors. Unfortunately, they only support voltages of 0-5 V. This module allows you to measure voltages of 0-25 V by presenting a lower voltage to the arduino for measuring.
After you have this value you simply feed it through some math and you get your actual voltage. Don’t ask me how this math works. I don’t know. If you do know however, please share. I’m really just editing the example code from the seller so that it will display decimal values instead far less useful int values.
By liking Our Facebook Page Embeded Studio , you can get special discount. Data Sheet of Voltage Sensor Module DC 0-25V can be also downloaded from the link.
To start you need to wire it up. It’s extremely easy as it only needs 3 wires.
Plug + into 5 V, – ground and S into an analogue pin. I have removed all but the relevant pins in a pin-out of the arduino nano. If you’re using another model then you’ll have to figure them out on your own. Any analogue pin will do. As far as I am aware at least. Once you have done this you’re ready to move on to the software.
- GND – This is where you connect the low side of the voltage you are measuring. Caution! : This is the same electrical point as your Arduino ground.
- VCC: The is where you connect the high side of the voltage you are measuring
- S: This connects to your Arduino analog input.
- – (or minus): This connects to your Arduino ground.
- +: This is not connected. It does absolutely nothing… zilch… nada… jack diddly doo doo.
[happyforms id=”5763″ /]
SKU: n/a -
All MIcroSolution Pro, SENSORS
DHT11 DIGITAL TEMPERATURE AND HUMIDITY SENSOR in Pakistan
DHT11 – Humidity and Temperature Sensor in Microsolution Hallroad Lahore
Specifications:
- Item: DHT11
- Measurement Range: 20-90%RH 0-50 ℃
- Humidity Accuracy: ±5％RH
- Temperature Accuracy: ±2℃
- Resolution: 1 Package:
- 4 Pin Single Row
- Pinning:
- 1=Vcc
- 2=Data
- 3=Open
- 4=GN
SKU: 50
