SGX MEMS Air Quality Gas Sensor CO VOC NH3 in Pakistan
SGX MEMS Air Quality Gas Sensor CO VOC NH3 Nitrogen Compound MICS-6814 Hallroad Lahore
Item specifics:
- Brand Name: MILONT
- Sensitivity: check it
- Measuring Range: check it
- Type: Non Heating Type
- Linear: check it
- Resolution: check it
- Hysteresis: check it
- Sensor Type: Piezoelectric
- Repeatability: check it
- Output model category: Digital sensor
- working principle: Gas sensor
- Sensor class: Energy consumption sensor
- Material: polymer
₨4,500
CompareRelated products
-
All MIcroSolution Pro, SENSORS
PIR INFRARED MOTION SENSOR AUTO ON OFF SWITCH MODULE in Pakistan
0 out of 5(0)PIR INFRARED MOTION SENSOR AUTO ON OFF SWITCH MODULE AUTO LIGHTS LAMPS Hallroad Lahore
Attention
1. To turn off power when installation, must be installed by professional
2. This switch can work normally after 45 seconds when electricity, it is infrared Sensor preheat time
3. Do not overload to usePackage Included:
1 x IR Motion Sensor Light SwitchSKU: n/a₨1,200 -
SENSORS
SCT-013-030 Non-invasive AC Current Sensor Clamp Sensor 30A in Pakistan
0 out of 5(0)SCT-013-030 Non-invasive AC Current Sensor Clamp Sensor 30A in Hallroad Lahore Pakistan
This is SCT-013-030 Non-invasive AC Current Sensor Clamp Sensor 30A. SCT-013-000 is a Non-Invasive AC current sensor i.e. it is a current transformer that can be used to measure AC current up to 100 amperes.
This non-invasive current sensor clamped around the supply line can measure a load up to 30 Amps, and allow you to calculate how much current pass through it. It can be useful for building your own energy monitor or for building an over-current protection device for an AC load. This current clamp can be used to detect a current of up to 30A. Simply clip it around the current source that you wish to measure and it will produce a (very) small AC voltage proportional to the current. The cable is terminated on one end with a standard 3.5mm jack (like a headphone jack).
Use this to build your own energy monitor and keep your power usage down, or use it to build an over-current protection device for an AC load. See the link below for an example project. Check out the datasheet for the pinout of the 3.5mm jack.
Applications
- Suitable for the current measuring.
- Monitoring and protection of AC motor
- Lighting equipment
- Air compressor
Features :
- Non-invasive current transformer
- Suitable for lighting equipment, AC motors, air compressors, monitoring, current measurement, and protection
- Meet UL94-V0 flame retardant properties
- Two forms of output current, voltage (voltage output built-in the sampling resistor)
- Non-linearity ±3%(10%-120% rated input current)
- Output Plug 3.5mm.
Package Includes :
1 x 30A AC Current Sensor Module.
SKU: n/a -
All MIcroSolution Pro, SENSORS
WRNM-02 K type Surface Thermocouple Ebow Shape Probe Thermocouple | Microsolution
All MIcroSolution Pro, SENSORSWRNM-02 K type Surface Thermocouple Ebow Shape Probe Thermocouple | Microsolution
0 out of 5(0)WRNM-02 K type Surface Thermocouple Ebow Shape Probe Thermocouple 0-900 Degrees Ceilsius with Thermocouple Extension Wire.
Item specifics:
- Model Number: k
- Output Type: mV
- DIY Supplies: Electrical
- Thermocouple: K
- Response: less than 0.4 second
- type: nichrome-nisiloy
- temperature range: 0-900 degrees ceilsius
- join: handheld
- is_customized: Yes
- package: 1 x WRNM-02 K type Surface Thermocouple
[happyforms id=”5763″ /]
SKU: n/a₨2,500 -
SENSORS, ARDUINO Nano
TF Mini LiDAR (Laser Ranging) Range Finder Sensor Module
0 out of 5(0)- ✅Delivery Type: Free Shipping
- ✅Payment Option: Cash on Delivery
- ✅Return Policy: 7 Days Return Warranty
- ✅Delivery Time: 24-48 Hours
- ✅Rapid return on investment
- ✅Environmentally friendly
- ✅CALL NOW For Original Seeedstudio Grove – TF Mini LiDAR
- Seeedstudio Grove TF Mini LiDAR (Laser Ranging) Range Finder Sensor Module for
- Arduino Pixhawk | Microsolution Lahore
SKU: n/a₨15,500