Selected:

SYNTHETOS GSHIELD (GRBLSHIELD) V5 in Pakistan | Microsolution

12,675.00

SYNTHETOS GSHIELD (GRBLSHIELD) V5 in Pakistan | Microsolution

12,675.00

SYNTHETOS GSHIELD (GRBLSHIELD) V5 in Lahore| Microsolution

 

 

Features:

  • 2.5 Amps per winding
  • 12-30 Input Voltage
  • Open Pin Pass Through
  • 8x Microstepping
  • Screw Down Terminal Voltage Input
  • Hardware 3x Axis (x,y,z)
  • 3x Robust TI DRV8818 Stepper Drivers

GShield Schematic

  • Dimensions: 58mm x 78mm / 2.3″ x 3.1″
  • Board Thickness: 2mm / .08″
  • Weight: 31g

For questions and more information on the GShield, check out the Synthetos Forums!

Add to Wishlist
Add to Wishlist

Description

SYNTHETOS GSHIELD (GRBLSHIELD) V5 in Pakistan | Microsolution

Create your very own Arduino-controlled 3-axis CNC machine with the gShield. The gShield for Arduino (formerly known as grblShield) is a complete hardware solution for Dank’s CNC motion control system calledgrbl. The gShield is compatible with the Uno and other 328p versions of the Arduino development platform. Version 5 is now compatible with running TinyG on the Arduino Due. The v5 power jumper simply allows the gShield to be run as a native 3.3v device from the Due, instead of a 5v device.

The Arduino gShield is a complete hardware solution for Dank’s CNC motion control system called grbl.  The gShield is also used in the Inflatables “X-Carve” CNC machine.  The gShield is also a good choice for any Shapeoko based machine.

  • Create your very own Arduino-controlled 3-axis CNC machine with the gShield. The gShield for Arduino (formerly known as grblShield) is a complete hardware solution for Dank’s CNC motion control system called grbl. The gShield is compatible with the Uno and other 328p versions of the Arduino development platform. Version 5 is now compatible with running TinyG on the Arduino Due. The v5 power jumper simply allows the gShield to be run as a native 3.3v device from the Due, instead of a 5v device.

    Features:

    • 2.5 Amps per winding
    • 12-30 Input Voltage
    • Open Pin Pass Through
    • 8x Microstepping
    • Screw Down Terminal Voltage Input
    • Hardware 3x Axis (x,y,z)
    • 3x Robust TI DRV8818 Stepper Drivers
  • GShield Schematic

    Dimensions: 58mm x 78mm / 2.3″ x 3.1″

    • Board Thickness: 2mm / .08″
    • Weight: 31g

    For questions and more information on the GShield, check out the Synthetos Forums!

Close Menu
×
×

Cart