Titan Battery Load Tester – BT 100A in Hall Road Lahore Pakistan
Specification:
TITAN BATTERY TESTER BT 100 A CAN BE USED TO TEST 6V AND 12 BATTERY SYSTEMS.IT CAN GENERATE LOAD JUNK LOAD UPTO 90A DC.UPTO 200A BATTERIES CAN BE TESTED.
TITAN BATTERY TESTER BT 100 A CAN BE USED TO TEST 6V AND 12 BATTERY SYSTEMS.IT CAN GENERATE LOAD JUNK LOAD UPTO 90A DC.UPTO 200A BATTERIES CAN BE TESTED.
₨8,000
Compare
TITAN BATTERY TESTER BT 100 A CAN BE USED TO TEST 6V AND 12 BATTERY SYSTEMS.IT CAN GENERATE LOAD JUNK LOAD UPTO 90A DC.UPTO 200A BATTERIES CAN BE TESTED.
UNI-T UT658 USB Tester is used to inspect USB charger and portable power source of electronics products. UT658 can output voltage, current, and power. Users can also use this device to monitor charging status of any USB powered device. UNI-T UT658 is now available in Pakistan. Moreover, It has two connections, one is input and other is output.
Specifications | Range | Remark | |||
Input Voltage Range (V) | 3V-9V | If higher than 9V, display OL | |||
Voltage Resolution | 0.01V | ||||
Voltage Monitoring Accuracy | ±1% | ||||
Current Monitoring Range (A) | 0A~3A | If higher than 3A, display OL | |||
Current Monitoring Accuracy | ±(1%±2) | Lower than 500mA:±3, (a% Reading+b Number) | |||
Current Resolution | 0.01A | If lower than 50mA, display 0.00 | |||
Capacity | 0~9999mAH | If higher than 9999, display OL | |||
Capacity Data Storage | 10 sets | ||||
Display | LCD | Backlight | |||
Warning | √ | Higher than 5.3V lower than 4.7V | |||
Buttons | √ | ||||
Contamination Level | 2 | ||||
Working Temperature | 0℃∽40℃ | ||||
Storage Temperature | -10℃∽50℃ | ||||
Relative Humidity | <75% |
This 40W Soldering Iron Soldering Tool is very commonly used for engineers and hobbyist.
Uses of a Soldering Iron
A soldering iron is a hand tool used to heat solder, usually from an electrical supply at high temperatures above the melting point of the metal alloy. This allows for the solder to flow between the work pieces needing to be joined.
1 × 40W Soldering Iron Soldering Tool
Heavy duty metal base featuring a reinforced spring holder.
Technical data
100% Brand New and High Quality
Weight:20g
The Solder Paste is a high viscosity no-clean flux , it can be used for PCB , SMD, reworking , it can be used for soldering and reballing of computer and phone chips .
It is the mixture of high-quality alloyed powder and resinic pasty flux , it can avoid the pale yellow residue , so you are easy to clean the board.
Soldering paste for cell phone PCB and SMD etc.
Help to repair the circuit boards and protect the electronic components
A necessary material for repairing the mobile phone mainboard
Flux Solder Paste
Volume: 10cc
includes
1 x 10cc Solder Paste
Live Chat