Weight Sensor 40kg Load Cell Sensor in Pakistan
Weight Sensor 40kg Load Cell Sensor in Brandreth Road Lahore
Material: Aluminum Alloy Material
Color: Silver and White
Size: 80x13x13mm / 3.1 ” x 0.5 ” x 0.5 ” Full
This wide bar load cell (sometimes called a strain gauge) can translate up to 40kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional of, the strain (e.g. pressure or force) applied to the bar. With this gauge you will be able to tell just how heavy an object is, if an object’s weight changes over time, or if you simply need to sense the presence of an object by measuring strain or load applied to a surface. Each wide bar load cell is made from an aluminum-alloy and is capable of reading a capacity of 10kg. These load cells have four strain gauges that are hooked up in a Wheatstone bridge formation. The color code on the wiring is as follows: red = E+, green = O+, black = E-, and white = O-. Additionally, these load cells offer an IP65 protection rating and feature four M6 sized thru holes for mounting purposes.
₨650
CompareWeight Sensor 40kg Load Cell Sensor in Brandreth Road Lahore
Material: Aluminum Alloy Material
Color: Silver and White
Size: 80x13x13mm / 3.1 ” x 0.5 ” x 0.5 ” Full
This wide bar load cell (sometimes called a strain gauge) can translate up to 40kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional of, the strain (e.g. pressure or force) applied to the bar. With this gauge you will be able to tell just how heavy an object is, if an object’s weight changes over time, or if you simply need to sense the presence of an object by measuring strain or load applied to a surface. Each wide bar load cell is made from an aluminum-alloy and is capable of reading a capacity of 10kg. These load cells have four strain gauges that are hooked up in a Wheatstone bridge formation. The color code on the wiring is as follows: red = E+, green = O+, black = E-, and white = O-. Additionally, these load cells offer an IP65 protection rating and feature four M6 sized thru holes for mounting purposes.
| Item Weight | 200 g |
| Package Dimensions | 15.5 x 9.8 x 3.4 cm |
| Batteries Included | No |
| Batteries Required | No |
| color code on the wiring | red = E+, green = O+, black = E-, and white = O- |
Related products
-
All MIcroSolution Pro, SENSORS
PIR INFRARED MOTION SENSOR AUTO ON OFF SWITCH MODULE in Pakistan
PIR INFRARED MOTION SENSOR AUTO ON OFF SWITCH MODULE AUTO LIGHTS LAMPS Hallroad Lahore
Attention
1. To turn off power when installation, must be installed by professional
2. This switch can work normally after 45 seconds when electricity, it is infrared Sensor preheat time
3. Do not overload to usePackage Included:
1 x IR Motion Sensor Light SwitchSKU: n/a -
SENSORS
SCT-013-030 Non-invasive AC Current Sensor Clamp Sensor 30A in Pakistan
SCT-013-030 Non-invasive AC Current Sensor Clamp Sensor 30A in Hallroad Lahore Pakistan
This is SCT-013-030 Non-invasive AC Current Sensor Clamp Sensor 30A. SCT-013-000 is a Non-Invasive AC current sensor i.e. it is a current transformer that can be used to measure AC current up to 100 amperes.
This non-invasive current sensor clamped around the supply line can measure a load up to 30 Amps, and allow you to calculate how much current pass through it. It can be useful for building your own energy monitor or for building an over-current protection device for an AC load. This current clamp can be used to detect a current of up to 30A. Simply clip it around the current source that you wish to measure and it will produce a (very) small AC voltage proportional to the current. The cable is terminated on one end with a standard 3.5mm jack (like a headphone jack).
Use this to build your own energy monitor and keep your power usage down, or use it to build an over-current protection device for an AC load. See the link below for an example project. Check out the datasheet for the pinout of the 3.5mm jack.
Applications
- Suitable for the current measuring.
- Monitoring and protection of AC motor
- Lighting equipment
- Air compressor
Features :
- Non-invasive current transformer
- Suitable for lighting equipment, AC motors, air compressors, monitoring, current measurement, and protection
- Meet UL94-V0 flame retardant properties
- Two forms of output current, voltage (voltage output built-in the sampling resistor)
- Non-linearity ±3%(10%-120% rated input current)
- Output Plug 3.5mm.
Package Includes :
1 x 30A AC Current Sensor Module.
SKU: n/a -
All MIcroSolution Pro, SENSORS
8 Sensor Line Following Array in Lahore | MIcrosolution
Sensor Line Following Array in Lahore.
Setting the Jumpers
The array has two configurable options: I2C address and I2C pull-up voltage.
I2C address
If you need to change the address of the array, move the solder jumper to set A0 and A1. The silkscreen table gives a reference. Seen in the photo, the default address is 0x3E. For example, if you want to use address 0x70, move A1 to the ‘1’ position and leave A0 at ‘0’.
[happyforms id=”5763″ /]
SKU: n/a
