XH-M452 DC 12V Thermostat Temperature Humidity Control Thermometer Hygrometer Controller in Pakistan
Out of stock
XH-M452 DC 12V LED Digital Thermostat Temperature Humidity Control Thermometer Hygrometer Controller Relay Module Hallroad Lahore
- Description:
- power supply : DC 12V
- Temperature measurement range : -40~120°
- Humidity range : 0~100%RH
- Control precision : 0.1° 0.1%RH
- Test probe : Integrated sensor
- output : 10A delay
- Size:65*55*28mm
₨1,750
Out of stock
CompareXH-M452 DC 12V LED Digital Thermostat Temperature Humidity Control Thermometer Hygrometer Controller Relay Module AM2301 Probe in Pakistan
Temperature control:
1. Set the temperature + :Normal display mode, long press the + key for 3 seconds, start temperature numerical flashing, press the + / – key setting values, wrong operation after 5 seconds, automatically return to detect temperature display
2. Set the temperature – :Normal display mode, long press – button for 3 seconds, stop numerical flashing temperature, press the + / – key set value
3. Restore the factory Settings :At the same time long press temperature, and humidity + key for 3 seconds, digital display, 888, 888
Set the start temperature:Long press the + key, start the flashing temperature, set start temperature by + / – key
set Stop temperature: long press – button, stop flashing temperature, set stop temperature by + / – key
Humidity Settings
Set to start humidity: long press the + key, start the humidity value flashing, set by + / – key launch humidity value
Set stop humidity: long press – to stop humidity value, set by + / – key to stop the humidity value
Fault code: display LLL mean the sensor fault
display HHH mean Test temperature exceed the range of measurement
Package Include:
Related products
-
Brandther Road Item's
1/2 inch Solenoid Valve 220V Coil in Pakistan
1/2 inch Solenoid Valve 220V Coil Brandther Road Lahore
Features:
The port size is 1/2” inch female NPT threaded. This Electric Solenoid Valve can handle low viscosity fluids below 20 cst. The orifice size is 25mm and Cv value is 12. It can withstand pressure up to 115 psi (8 bar) and temperatures as low as 15°F and as high as 265°F. The seal material is FKM or Viton Rubber. This valve works in one direction and will not prevent media from moving backwards in the opposite direction. This specific valve has a 12 Volt DC coil with a voltage range that is -+ 10. The coil head is fitted with 5″ lead wires that can easily be connected with your own choice of terminals. The coils are not polarized, which mean that positive/negative does not matter when wiring them. The top of the coil features a label that indicates the valve type and specifications. Its response time is very low; in fact, it acts in less than one second, making it a great choice for all types of applications.
SKU: n/a -
Brandther Road Item's
AC 110V-240V 180 Degree Outdoor IP44 Security PIR Infrared Motion Sensor in Pakistan
Brandther Road Item'sAC 110V-240V 180 Degree Outdoor IP44 Security PIR Infrared Motion Sensor in Pakistan
AC 110V-240V 180 Degree Outdoor IP44 Security PIR Infrared Motion Sensor in Hallroad
FUNCTION:
1.Detection field: The wide detection range is made up of up and down, left and right (see the following diagram), the detection range could be adjusted according to your desire, but the moving orientation in detection field has great relation with the sensitivity.
2.Identify day and night automatically: The ambient light of ST09 could be adjusted according to your desire: when turn to SUN (max), it will work day and night, when turn it to MOON (min), it will only work in the ambient light less than 3LUX. As for adjustment, please refer to testing way.
3.Time-delay is added continually: When it receives the second induction signals after the first induction, it will compute time once more on the rest of the first time-delay basis (set time).
4.Time-delay is adjustable: It can be set according to your desire, the minimum is 10sec±3sec,the maximum is 7min±2min.SKU: n/a -
Brandther Road Item's
1 inch Solenoid Valve 12 V Coil in Pakistan
1 inch Solenoid Valve 12 V Coil in Hallroad Pakistan
12V Solenoid Valve Coil 1 inch in Pakistan Featured here is Model 2W-250-25 of our brass valve line. This particular valve is a two-way, semi-direct lift valve with a normally closed operating position. This means that there are two ports in which media flows, the valve will open when the coil is energized and allow media to pass through. Removing the energy from the valve coil will close it and stop the flow. It works across various media such as hot water, air, gas, diesel fuel, Freon, weak acids and weak alkali. The valve features a heavy duty, solid brass body that’s sure to last in the most strenuous projects.
Features:
The port size is 1” inch female NPT threaded. This Electric Solenoid Valve can handle low viscosity fluids below 20 cst. The orifice size is 25mm and Cv value is 12. It can withstand pressure up to 115 psi (8 bar) and temperatures as low as 15°F and as high as 265°F. The seal material is FKM or Viton Rubber. This valve works in one direction and will not prevent media from moving backwards in the opposite direction. This specific valve has a 12 Volt DC coil with a voltage range that is -+ 10. The coil head is fitted with 5″ lead wires that can easily be connected with your own choice of terminals. The coils are not polarized, which mean that positive/negative does not matter when wiring them. The top of the coil features a label that indicates the valve type and specifications. Its response time is very low; in fact, it acts in less than one second, making it a great choice for all types of applications.
SKU: n/a -
Brandther Road Item's
1 inch Solenoid Valve 220V Coil in Pakistan
1 inch Solenoid Valve 220V Coil in Hallroad Pakistan
12V Solenoid Valve Coil 1 inch in Pakistan Featured here is Model 2W-250-25 of our brass valve line. This particular valve is a two-way, semi-direct lift valve with a normally closed operating position. This means that there are two ports in which media flows, the valve will open when the coil is energized and allow media to pass through. Removing the energy from the valve coil will close it and stop the flow. It works across various media such as hot water, air, gas, diesel fuel, Freon, weak acids and weak alkali. The valve features a heavy duty, solid brass body that’s sure to last in the most strenuous projects.
Features:
Product Overview
The SZW-25-220VDC is a 220Volt DC, 1” Stainless Steel, 2-way Solenoid Valve. This valve is compatible with a variety of media such as air, water, gas, diesel fuel, weak acids and glycol. The valve features a solid stainless steel body with a Viton seal. It is suitable for temperatures from 15°F up to 250°F. This valve requires 18 watts from a DC power source typical to that of a car battery.
SKU: n/a
