Mini Speaker | Lahore
A small audio speaker that is ideal for radio and amplifier projects and is small enough to fit in robot projects.
Subtotal: ₨9,800
[happyforms id=”5763″ /]
₨50
CompareA small audio speaker that is ideal for radio and amplifier projects and is small enough to fit in robot projects.
Brand | SGX. |
---|---|
Output model category | Digital sensors |
Working principle | Gas sensor |
Sensor category | Energy consumption sensor |
Material | Polymers |
[happyforms id=”5763″ /]
The Voltage Sensor Module DC 0-25V is making this is because I couldn’t find any really helpful information on how to fix the code for my voltage sensor. Arduino’s have built in voltage sensors. Unfortunately, they only support voltages of 0-5 V. This module allows you to measure voltages of 0-25 V by presenting a lower voltage to the arduino for measuring.
After you have this value you simply feed it through some math and you get your actual voltage. Don’t ask me how this math works. I don’t know. If you do know however, please share. I’m really just editing the example code from the seller so that it will display decimal values instead far less useful int values.
By liking Our Facebook Page Embeded Studio , you can get special discount. Data Sheet of Voltage Sensor Module DC 0-25V can be also downloaded from the link.
To start you need to wire it up. It’s extremely easy as it only needs 3 wires.
Plug + into 5 V, – ground and S into an analogue pin. I have removed all but the relevant pins in a pin-out of the arduino nano. If you’re using another model then you’ll have to figure them out on your own. Any analogue pin will do. As far as I am aware at least. Once you have done this you’re ready to move on to the software.
[happyforms id=”5763″ /]
The array has two configurable options: I2C address and I2C pull-up voltage.
If you need to change the address of the array, move the solder jumper to set A0 and A1. The silkscreen table gives a reference. Seen in the photo, the default address is 0x3E. For example, if you want to use address 0x70, move A1 to the ‘1’ position and leave A0 at ‘0’.
[happyforms id=”5763″ /]
Live Chat